The Texan Theater

StonePly Natural Stone Toilet and Restroom Partitions, Stalls, Screens and Dividers

The ship times listed are for shipping StonePly bathroom partitions after the standard 12 to 14 week fabrication time.

Shipping Location Transit Time (average)

New York, NY                                                                           5 Days

Los Angeles, CA                                                                       3 Days

Chicago, IL                                                                                 3 Days

Dallas–Fort Worth, TX                                                          1 Days

Philadelphia, PA                                                                      5 Days

Houston, TX                                                                              1 Days

Miami, FL                                                                                   5 Days

Washington, DC                                                                        5 Days

Atlanta, GA                                                                                4 Days

Boston, MA                                                                                4 Days

Detroit, MI                                                                                 3 Days

Phoenix, AZ                                                                               2 Days

San Francisco–Oakland, CA                                                3 Days

Riverside–San Bernardino, CA                                          3 Days

Seattle, WA                                                                                 5 Days

Minneapolis–St. Paul, MN                                                   3 Days

San Diego, CA                                                                            3 Days

St. Louis, MO                                                                             2 Days

Tampa–St. Petersburg, FL                                                  4 Days

Baltimore, MD                                                                          4 Days

Denver, CO                                                                                2 Days

Pittsburgh, PA                                                                         4 Days

Portland, OR                                                                             5 Days

Cincinnati, OH                                                                         4 Days

Sacramento, CA                                                                      3 Days

StonePly bathroom partitions are stronger and much lighter than solid slab stone. StonePly ships from our Greenville, Texas factory (near Dallas). Depending on the stone selected, the lead times are typically 12 to 14 weeks for production and one week for shipping. Ship times to the various states are as follows:

1 Day Shipping Most of Texas (TX) Oklahoma (OK) Louisiana (LA) Arkansas (AR) Missouri (MO) Tennessee (TN)

2 Day Shipping Colorado (CO) Arizona (AZ) Alabama (AL) Kansas (KS) Illinois (IL) New Mexico (NM) Nebraska (NE)

3 Day Shipping Iowa (IA) Utah (UT) South Dakota (SD) Nevada (NV) Minnesota (MN) Kentucky (KY) Indiana (IN) Michigan (MI) North Dakota (ND) Wisconsin (WI)

4 Day Shipping Connecticut (CT) Delaware (DE) Florida (FL) Georgia (GA) Indiana (ID) Massachusetts (MA) Maryland (MD) Maine (ME) Mississippi (MS) Montana (MT) North Carolina (NC) New Hampshire (NH) New Jersey (NJ) New York (NY) Ohio (OH) Pennsylvania (PA) Rhode Island (RI) South Carolina (SC) Virginia (VA) Vermont (VT) West Virginia (WV) Wyoming (WY)

5 Day Transit Oregon (OR) Washington (WA)

The post StonePly Natural Stone Toilet and Restroom Partitions, Stalls, Screens and Dividers appeared first on Stone Panel Information.

StonePly offers a range of granite veneer panels

Virtually any granite from anywhere in the world is available from StonePly. By bonding natural granite to an aluminum honeycomb core, StonePly provides a thin, lightweight and super strong veneer panel.

Uses include

• cladding panels
• exterior curtain wall panels
• interior stone wall panels
• stone facade cladding
• elevator cabs
• ship and plane interiors

Benefits of StonePly Granite Veneer

StonePly offers granite veneer panels that are:

• Up to 60 times stronger than slab granite
• Up to 1/8th the weight of slab granite
• Easy and secure mechanical attachment
• Great for new construction or re-cladding
• Class A rated with zero flame spread
• Meet the requirements of all national building codes

To see the huge selection of granites from around the world, download CAD details, or view the specifications, visit www.StonePly.com

or call us at 903-454-4630.

The post Granite Veneer Panels by StonePly appeared first on Stone Panel Information.

Sandstone faced StonePly veneer cladding is composed of an aluminum honeycomb base with a sandstone veneer permanently bonded to the face.  Sandstone is a sedimentary stone, made up primarily of sand sized grains of minerals. The most common minerals in sandstone are quartz and feldspar.  Sandstone veneer cladding panels are available in almost any color, the most common being red, brown, yellow, tan, pink, gray and white.

StonePly sandstone veneer cladding panels are generally used in a smooth sawn or honed finish. Sandstone is not available in a polished surface.  Sandstone in a honed finish provides a smooth, non-reflective surface. Rougher surfaces are available with bush hammered or sandblasted sandstone.

Compared to slabs of sandstone , StonePly thin sandstone veneer offers lighter weight, greater strength (60 times stronger), secure mechanical fastening and easier detailing, install and support.

Sandstone used with StonePly, lightweight veneer cladding panels include:

• Agra Red sandstone
• Autumn Brown sandstone
• Rainbow Sandstone
• Teakwood Sandstone
• Coffee Sandstone

Applications for StonePly sandstone veneer cladding include:

• Curtain wall cladding
• Stone spandrel panels
• Store front
• Elevator walls and floors
• Signs
• Interior and exterior walls

For more information go to www.StonePly.com

The post Natural Sandstone Veneer Cladding appeared first on Stone Panel Information.

Why select thin natural granite, marble, limestone or travertine cladding by StonePly?

Advantages of StonePly thin stone wall cladding

• Lightweight (8 times lighter than solid slabs)
• Strong (60 times greater impact strength than slabs)
• Simple mechanical attachment
• Ideal for new construction or re-cladding
• Zero flame spread
• Meets requirements of all national building codes

Applications for StonePly thin stone cladding

Cladding, stone panels for curtain walls, stone spandrel panels, store front, trim, interior and exterior walls.

Stone selection for thin stone wall cladding

• Granite
• Marble
• Travertine
• Sandstone
• Limestone
• Onyx

To see the StonePly selection of stones from around the world, download CAD details or view the thin stone wall cladding  specifications, visit www.StonePly.com

The post Thin Stone Wall Cladding appeared first on Stone Panel Information.

StonePly is also resistant of flying debri.  When a 2″ x 4″ wood stud is launched towards a StonePly panel at 50 ft/sec, it merely bounces off of the panel with little damage.  When the same test is done to a solid traditional 1 1/2″ thick stone panel, the panel is shattered.  This shows the durability of StonePly stone panels.  The thin, natural stone is bonded to a sheet of honeycomb.  The honeycomb works as reinforcement to make the panels strong and durable.

The panels become shatter resistant because every square inch of the stone is bonded to the honeycomb.  If hit hard enough, the stone will only crack and maybe chip off in very small pieces.  Where as, if a traditional thick piece of stone is struck hard enough it will crack and break off in large chunks which can be dangerous, especially if the pieces are falling from 50 stories above.

More detailed information can be found on our website.

The post StonePly Stone Panels Wind Loads appeared first on Stone Panel Information.

StonePly with honeycomb is noncombustible and is a great option for elevator panels.  With a variety of stone choices, StonePly elevator panels will bring a unique and elegant feeling to any hotel, casino, or business elevator lobby.

StonePly countertops are to be used when the weight of conventional stone countertops are an issue such as on yachts and cruise ships.  StonePly countertops weigh up to 80% less than thick stone countertops.

Since StonePly is light in weight, it is the smart option for wall, floor, and ceiling panel cladding.  StonePly weighs 80% less than other conventional wall cladding methods.  This shortens installation time and costs because the panels can typically be installed without the use of cranes, unlike heavy thick stone panels.

StonePly water walls can be a great addition to the home or office.  They are waterproof and lightweight and bring elegance to any room.  StonePly can also incorporate a company logo or name into the design.

The post Uses appeared first on Stone Panel Information.

For a list of advantages and more information on using StonePly lightweight stone panels over conventional, thick stone panels please visit our website.

The post StonePly Stone Panels as a Radiant Heat Barrier appeared first on Stone Panel Information.

Lower Weight

StonePly natural stone panels only weigh about 3.5 pounds per square foot. StonePly thin stone panels weigh 80 percent less than thick stone panels making them superior to thick, heavy stone panels.

Higher Strength

StonePly stone panel cladding consists of a natural thin stone panel adhered with aviation epoxy to an aluminum substrate such as honeycomb or composite material.The rigidness of the aluminum substrate allows the stone face to be very thin but strong and durable at the same time.

Faster Installation

Because StonePly is a thin stone panel attached to a strong, but lightweight aluminum backing they are easier to install. In most cases, StonePly light weight stone panels install with minimal effort. Also, since the stone panel cladding system requires no mortar, installation can proceed in almost any type of weather.

Impact Resistant

With StonePly stone panel cladding, every square inch of stone is adhered to a rigid aluminium backing.This makes the stone face strong and impact resistant. StonePly stone panels have 60x the impact strength of a 1.5 inch thick stone panel. StonePly stone panels have been tested and proven to hold up in hurricanes, earth quakes, and tropical storms.

The post StonePly Panel Benefits appeared first on Stone Panel Information.

StonePly offers three types of backing substrates to strengthen thin stone panels.

1. StonePly HC is an aluminum backing shaped like a honeycomb matrix. This is the strongest and most rigid backing StonePly offers. StonePly HC is perfect for exterior stone cladding panels. The Z Clip , plate and screw, or interlocking channel methods for installation make these honeycomb panels strong, lightweight, and easy to install. StonePly HC has an impact strength up to 60x greater than 1.5” stone. StonePly HC can be 3/4” – 1” thick. The thicker the StonePly HC backing that is used, the more flexural strength the panel will have.

Stone with Honeycomb Back

2. StonePly ACM is a thin aluminum composite material that is laminated to the back of a natural thin stone panel. StonePly ACM is easy to install by adhering the composite panels to the surface using structural silicone. This backing substrate is good for interior applications and furniture. StonePly ACM is only ¼” thick. The thicker the StonePly ACM is, the more flexural strength the entire panel unit will have.

Stone with ACM Backing

3. StonePly Translucent is made of glass or polycarbonate and is laminated to stones that are translucent. This allows translucent stones such as onyx and marble to be back lit. These composite translucent panels are great for light coves, lighted columns, windows, and bar tops. StonePly Translucent varies in thickness depending on the thickness and size of the stone panels its being laminated to.

The post StonePly Backing Options appeared first on Stone Panel Information.

StonePly® is designed for use as cladding on exterior and interior walls, soffits, fascias, cornices, canopies, accent bands, elevator cabs, counter tops, and furniture. StonePly® can be used on most building types including in retail, hotels, office towers, casinos, medical facilities, low rise buildings, high rise buildings, condos, and educational buildings.

StonePly® is a fabricated stone panel system that utilizes a composite panel made by adhering a thin natural stone layer to an aluminum honeycomb, aluminum composite, poly-carbonate, or glass substrate with aviation epoxies. The thin stone layer attached to a lightweight substrate allows StonePly® stone panel cladding to be attached almost anywhere on the building including on ceilings and high rise buildings.

The post Applications appeared first on Stone Panel Information.